Precautions for installation of sliding door track

2022-07-22
  • Detail

For the partition design between the living room balcony or kitchen and dining room, many users will choose to use sliding doors for decoration. It can not only make the space planned, but also make the overall light more transparent. What should we pay attention to when installing the sliding door track? What are the tips for later cleaning and maintenance? Next, let's have a look

for the partition design between the living room balcony or kitchen and dining room, many users will choose to use sliding doors for decoration. It can not only make the space planned, but also make the overall light more transparent. What should we pay attention to when installing the sliding door track? What are the tips for later cleaning and maintenance? Next, let's have a look

precautions for the installation of sliding door track:

1. Before installing the sliding door track, it is necessary to discuss with the carpenter in advance to reserve the sliding door installation position, plan the reserved position, and make the door pocket. It is also necessary to accurately measure the place where the sliding door is installed to avoid size discrepancy

2. Pay special attention to protect the finished decoration around during the installation of the sliding door track. For example, when installing the track, be careful that the cutting machine cuts the ground material, which makes it difficult to repair. Do not make the sliding door track too wide. Too wide will lead to low stability of the sliding door, easy to shake in use, and will also affect the service life of the track

3. The thickness of the sliding door track frame profile should not be too thin, and the frame thickness should generally reach 1.2mm— 1.5mm, so that it will not shake and is relatively stable. In order to make the design of the sliding door more beautiful, some manufacturers use low-quality cold-rolled steel plate formed carbon steel materials to make the door edge, and the thickness of the profile is less than 1mm

4. After the installation of the sliding door, check whether the whole door is easy to push and pull, whether it can be operated freely, and whether it can be tightly closed. If the sliding door installed between the kitchen and the restaurant cannot be closed tightly, it will cause a large amount of oil smoke to run out and pollute other rooms

sliding door track cleaning and maintenance skills:

1. Regularly clean the sliding door surface with a soft cloth dipped in clean water or neutral detergent. Do not use ordinary soap and washing powder, let alone strong acid-base cleaners such as decontamination powder and toilet detergent. If the sliding door body is made of plate material, the wet cloth used during cleaning shall be screwed dry and wiped

2. Do not use sandpaper, wire brush or other abrasives for wiping test, especially where there are cracks and dirt, use a soft cloth stained with alcohol to wipe

3. Clean the slide rail groove regularly to keep the sliding door open and close smoothly. The pulley of the sliding door is divided into upper and lower wheels. The pulley is the soul of the whole inner door. It is recommended to order oneortwo drops of lubricating oil every half a year or so to keep it smooth. Of course, if the pulley slides with needle bearings, there is no need to add lubricating oil, as long as you pay attention to cleaning sundries

4. Besides the track, sealing wool and glass glue seal are the key structures to ensure the sealing and sound insulation of the sliding door. In case of falling off, they should be repaired and replaced in time

conclusion: the above is the precautions for the installation of sliding door track and the related contents of cleaning and maintenance in the later stage. I hope it can help you. If you still need to know more relevant knowledge in the later stage, please pay attention to the information

徐州男科医院

郑州乳腺医院

宁波妇科医院

Copyright © 2011 JIN SHI